Replica Watch JJZ Factory

The mainstream Hublot replica market in China has long been dominated by V6 Factory, BB Factory, and ZF Factory. However, Replica Watch JJZ Factory rose to the challenge, specializing in Hublot’s best-selling Classic Fusion series. After three years of mold development, they finally launched their first all-ceramic Hublot Classic Fusion 542.CM. 1171 with titanium screws in 2023. It became popular on forums right away. Later, they expanded the 42MM case platform to other series like Big Bang and Square Bang, covering the entire Hublot range. They managed to stand firm by matching the materials and cloning the movements. Of course, focusing on Hublot doesn’t mean they only make Hublot. They also make a few classic models of top brands like Patek Philippe and Vacheron Constantin. But these are far less popular and produced in much smaller quantities compared to Hublot.

When it comes to the case design, JJZ Factory always sticks to the original proportions. The diameter is mainly 42MM. The thickness, chamfers, and H-shaped screw positions are all formed in one go by CNC. There are three case materials to choose from: 316L stainless steel, genuine ceramic, and titanium alloy. All steel cases from JJZ are made of 316L stainless steel, which is more corrosion-resistant than ordinary 304 stainless steel. The genuine ceramic material is made from high-purity alumina powder, cold isostatically pressed at 2000 bar, and then sintered at 1600°C before being formed by CNC. It has a hardness of 1200HV, making it very scratch-resistant, but it’s not good with bumps. Titanium alloy is lighter than steel and also resistant to seawater corrosion. Replica Watch JJZ Factory only uses this material for the special edition with titanium screws and titanium case, maximizing the benefits. The cost is 25% higher than the steel case. The dial is always made with double anti-reflective sapphire glass, with a colorless AR coating on the inside. You won’t be bothered by reflections when you check the time. The bezel and case are made from the same material in one piece, and then separated for brushing and polishing. The H-shaped screws have an interesting feature: they match the case material. Steel goes with steel, titanium with titanium, and ceramic still pairs with titanium. This combination ensures consistent electrical potential. The straps are usually made from Italian top-grain calf leather, treated with water-resistant coating. The inside is lined with natural rubber, so it’s comfortable to wear, sweat-resistant, and feels almost like nothing. They come with quick-release spring bars, so you can swap straps by hand in like three seconds. Change up your style anytime.

How’s the water resistance on JJZ factory replica watch? This is something JJZ factory takes seriously. The sapphire crystal is pressed into a metal ring with UV glue. Gaskets are made of fluororubber. Every watch gets tested in a vacuum chamber for leaks—if there’s no bubbles, it passes. They’re rated for 50m, so daily hand washing or swimming is fine. But don’t keep it in the water for too long. JJZ Factory | Best JJZ Factory Watches – Replica Watch Wholesale isn’t perfect, though. Their product line is pretty limited—mostly 42mm Hublots. If you like 38mm or 45mm complicated chronographs, you’ll have to look somewhere else. Also, their ceramic cases are hard but brittle. If you give it a hard knock, you’ll probably have to send it back to the factory to replace the whole case.

JJZ factory’s hottest model is probably the Hublot Classic Fusion 542.CM.1171.RX in black ceramic. People call it a must-buy for beginners, and it’s their best-seller. Then there’s the Classic Fusion 542. NX.7170.LR with titanium case and blue dial. Its color is really close to the original Tiffany blue, and it gets asked about a lot. The exterior is like 95% identical to the real thing. So what is the quality of the JJZ factory’s movement? JJZ Factory mainly uses cloned HUB1110 and HUB1112 movements. They take a Chinese Sea-Gull 2892 as the base, strip it down, then plate the bridges in rhodium. They add a custom rotor with the HUBLOT Skeleton logo and steel stamp, rebuilding everything 1:1 like the original. The thickness is just 3.6mm, so it fits right into the 42mm ultra-thin Classic Fusion case without needing a fake extra plate. JJZ Factory pays attention to the small stuff, too. The main plate is engraved with fish-scale and sunray patterns. The upper bridge has Geneva stripes. All the blue screws are baked at a constant 200°C for 30 minutes, so the color is even and looks just like the original under the same light. The only real difference is there’s no tiny “SWISS” engraving under the balance wheel. But from a normal distance, you can’t tell. JJZ Factory’s method of modifying the Sea-Gull 2892 into a HUB1112 is one of the best clone movements out there for Hublot right now. The finishing and beveling are all done in one go. It’s thin, no fake plate needed, and the display case back looks just like the real deal.

If you want to find a clone watch that can be used for daily commuting, 42MM Replica Watch JJZ Factory Hublot is really a good choice. The ceramic case is scratch-resistant, the steel tape can be quickly disassembled, and the new style can be switched anytime and anywhere. The HUB1112 clone movement is light, thin, stable and highly simulated, and you can bring back a super cost-effective sports commuter watch full of mechanical beauty at a fraction price. Don’t you wanna give it a try?