F1 Factory Replica Cartier Santos WGSA0113

Is The Cartier Santos WGSA0113 Replica Watch From F1 factory Worth Buying?

The F1 factory has transformed the Cartier Santos WGSA0113 replica watch into a symmetrical aesthetic watch that can be worn on the wrist. The square case itself carries a stubbornness of opposing the mainstream round, and the F1 factory version makes this stubbornness even more accessible. It has completely preserved the DNA that has accompanied the flight pioneers since its birth in 1904. Combined with the alternation of hand polishing and brushing, it allows us to also feel the shock brought by this geometric aesthetic.

Details of Cartier replica watches from F1 Factory compared to genuine ones
The entire case is made of 316L stainless steel blank and formed in one go by five-axis CNC. There are no welded or assembled lugs. The side view arc is very smooth and flowing. The surface is first brushed with a 220-mesh finish, and then the edges and screw holes are given a diamond-cut high-gloss finish. The two textures meet at a 45-degree chamfer. When touched by finger, only a thin line can be felt, but no burrs can be seen. The thickness of the entire watch has been compressed to 7.3 millimeters, allowing even the most demanding shirt cuffs to swallow it. The platinum-plated layer quietly glows on the case and bezel, with a color that is a bit more flesh than the cold white of steel and a bit less bluish than palladium plating, precisely falling within the low-key high-gloss range of platinum. It doesn’t attempt to pretend to be the flamboyant of precious metals, yet it can make the skin tone look clean under the light. When worn daily, the chloride ions in sweat and the alcohol in perfume will leave a brief water film on the metal surface, and the coating isolates all of this from the air. Even after half a year, it remains very bright.

The dial is brown, but not so brown. It is based on pure silver. First, radial patterns are pressed out, and then three depositations are made in a vacuum furnace. The color gradually fades from the center to the periphery. The track scale is not printed but fine grooves directly dug out on the surface with a 0.15-millimeter drill. When light passes through, a very thin white line will appear. The swatt-shaped hands are baked to a steel blue color at 320 degrees Celsius, with the edges polished to 8000 mesh. The mirror surface is made of sapphire material, with a Mohs hardness of 9. Neither keys nor coins can leave any marks. When viewed from the side, the gap between the mirror surface and the case is only 0.05 millimeters. Fingernails cannot be inserted, nor can dust get in. For daily cleaning, a lint-free cloth can be gently brushed over to restore transparency.

How good is the workmanship of Cartier replica watches from the F1 factory?
The movement is based on the Miyota 82Y5. The main plate is replaced with rhodium-plated brass, which is only 0.4 millimeters thick. However, all gear positioning and screw hole positions must be completed on it. If the CNC tool wear exceeds 0.005 millimeters, it will be replaced to ensure that each hole wall is as smooth as ceramic. The winding feel has also been re-tuned by the F1 factory. Each time the crown turns, it passes through 35 tiny spines. 18 turns can allow the mainspring to store power for 38 hours, while the genuine product requires 20 turns. The difference is so small that it can almost be ignored.

Will a square watch cause discomfort to the hand when worn?
The wearing experience is also the most cunning selling point of this F1 factory Cartier. It weighs only 61 grams but uses a solid inner cover to lower the center of gravity. When worn on the wrist, it won’t rotate left or right and won’t hit the edge of the table while typing. The 7.3-millimeter thickness allows the cuffs to hang naturally without bulging, making it easy to slide in and out even when wearing a high-neck sweater in winter. The ritual of manually winding the chain only takes ten seconds each day, yet it can create a brief pause for oneself in the elevator during the morning rush hour. The square case makes the lines of the wrist look more rugged. The cold light of the platinum plating brightens the skin tone. The brown dial complements the coats of autumn and winter and the T-shirts of summer, making it very easy to match. If you only want to buy a watch that you can wear and go out with, the F1 factory Cartier Santos WGSA0113 replica watch is a very worthy choice to consider.

We sell the best F1 Factory Replica Cartier Santos WGSA0113 fake watches, this is F1 Factory by purchasing original replica Mens Watches Santos series watches. If you are interested in wholesale replica Mens Watches watches, you can contact our online customer service and give the lowest wholesale price according to the quantity you need.